AF INDUSTRIAL PUMP

AF 1.1 GPM IND

• 1.1 GPM Industrial plunger pump 1000 psi operating pressure.  External pressure regulator to control bypass route for optimal cooling of pump head and internal valves.
• 1HP, 110-Volt Industrial motor (TEFC) Totally enclosed fan cooled.  Motor is equipped with an internal electric fan to keep motor cool during extreme running conditions and severe heat. Totally enclosed to insure dust, debris and insects do not enter and contaminate internal electric motor windings. Ensuring long life of the motor.
• Water safety switch with 10 psi cut off.  Switch will shut down pump when water pressure is dangerously low or water is off completely to the pump. This ensures the pump will never run dry without water, due to human error or unsafe water pressure.
• Electric water inlet valve shuts water at pump when system is not in use.
• Electric 1000 psi normally open drain valve. Drains system at pump every time system shuts down. This ensures fresh water will enter system and lines each time system is started and relieves pressure in lines so system does not drip on patio when it is off.
• Dual 10” filtration. One 5-micron siliphos primary filter. Stops debris down to 5-micron and siliphos crystals coat lines and nozzles, so calcium and other hard minerals do not adhere to the inside of lines. One 5-micron post filter ensures only clean water will enter system.
• Aluminum enclosure with external pressure gauge. All pump components are enclosed under lid so sun, dirt and debris do not damage pump and its components. Enclosure also gives pump system a cleaner design and allows for a professional installation. External pressure gauge allows customer to visually see pressure without removing lid.
• 24-Volt low voltage control.  24-Volt transformer and contactor allows customer to control pump system from customers desired location. Contactor allows easy start up for motor, increasing life of motor.